Pine Tree Quilt Block

A free cutting chart for 6", 9" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Pine Tree is a six-by-six picture block: a tree of ten plain squares edged with eight half-square triangles, widening from a point at the top to four squares across, over a trunk two squares wide and two tall, on sky.

  • 6 × 6 grid
  • 6", 9" and 12" finished
  • 3 fabrics
The Pine Tree block as the Quiltler studio draws it.

What the Pine Tree block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Sky14 squares (2") and 8 half-square triangles (2")
Tree8 half-square triangles (2") and 10 squares (2")
Trunk4 squares (2")

The pattern sews it from 8 half-square triangle units (H1).

Pine Tree cutting chart

Cut sizes for one block at 6", 9" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1" grid, 6½" unfinished)

FabricCutFor
Sky4 squares 1⅞"H1: half-square triangles, two at a time
Sky14 squares 1½"Finishes at 1" square
Tree4 squares 1⅞"H1: half-square triangles, two at a time
Tree10 squares 1½"Finishes at 1" square
Trunk4 squares 1½"Finishes at 1" square

9" finished block (1½" grid, 9½" unfinished)

FabricCutFor
Sky4 squares 2⅜"H1: half-square triangles, two at a time
Sky14 squares 2"Finishes at 1½" square
Tree4 squares 2⅜"H1: half-square triangles, two at a time
Tree10 squares 2"Finishes at 1½" square
Trunk4 squares 2"Finishes at 1½" square

12" finished block (2" grid, 12½" unfinished)

FabricCutFor
Sky4 squares 2⅞"H1: half-square triangles, two at a time
Sky14 squares 2½"Finishes at 2" square
Tree4 squares 2⅞"H1: half-square triangles, two at a time
Tree10 squares 2½"Finishes at 2" square
Trunk4 squares 2½"Finishes at 2" square

How to sew a 12" Pine Tree block

Make the units

  1. Pair each Tree square with a Sky square, 2⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 8 units from 4 pairs. Each should measure 2½" square with seam allowance.

Sew the block

  1. The block takes 8 × H1; make them first.
  2. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Pine Tree blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Pine Tree. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Pine Tree block FAQ

What do I cut for a 12" Pine Tree block?

For one 12" finished Pine Tree block, with a quarter-inch seam: Sky: 4 squares 2⅞"; 14 squares 2½". Tree: 4 squares 2⅞"; 10 squares 2½". Trunk: 4 squares 2½".

How many Pine Tree blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Pine Tree block be?

It is drafted on a 6 × 6 grid, so it works at any size that grid divides evenly. 6", 9" and 12" give 1", 1½" and 2" squares of the grid.

Design a Pine Tree quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app