Fox and Geese Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Fox and Geese is a four-by-four block in quarters. Two opposite quarters are each one large half-square triangle, and the other two each hold two small half-square triangles on the diagonal with two plain background squares.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Fox and Geese block as the Quiltler studio draws it.

What the Fox and Geese block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Background2 half-square triangles (6"), 4 squares (3") and 4 half-square triangles (3")
Accent2 half-square triangles (6") and 4 half-square triangles (3")

The pattern sews it from 2 pieced sections (U1) and 6 half-square triangle units (H1, H2).

Fox and Geese cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Background1 square 3⅞"H1: half-square triangles, two at a time
Background2 squares 2⅜"H2: half-square triangles, two at a time
Background4 squares 2"Finishes at 1½" square
Accent1 square 3⅞"H1: half-square triangles, two at a time
Accent2 squares 2⅜"H2: half-square triangles, two at a time

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Background1 square 4⅞"H1: half-square triangles, two at a time
Background2 squares 2⅞"H2: half-square triangles, two at a time
Background4 squares 2½"Finishes at 2" square
Accent1 square 4⅞"H1: half-square triangles, two at a time
Accent2 squares 2⅞"H2: half-square triangles, two at a time

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Background1 square 6⅞"H1: half-square triangles, two at a time
Background2 squares 3⅞"H2: half-square triangles, two at a time
Background4 squares 3½"Finishes at 3" square
Accent1 square 6⅞"H1: half-square triangles, two at a time
Accent2 squares 3⅞"H2: half-square triangles, two at a time

How to sew a 12" Fox and Geese block

Make the units

  1. Pair each Accent square with a Background square, 6⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 2 units from 1 pair. Each should measure 6½" square with seam allowance.
  4. Pair each Accent square with a Background square, 3⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  5. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  6. Make 4 units from 2 pairs. Each should measure 3½" square with seam allowance.

Sew unit U1

  1. Each unit U1 takes 2 × H2; make them first.
  2. Sew each row of Unit U1 together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. Each unit U1 should measure 6½" square including seam allowance. Make 2, and check the first against the drawing before making the rest.

Sew the block

  1. The block takes 2 × unit U1 and 2 × H1; make them first.
  2. Lay the sections out as the drawing shows, 2 rows of 2. Sew the sections of each row together, pressing the seams in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Fox and Geese blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Fox and Geese. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Fox and Geese block FAQ

What do I cut for a 12" Fox and Geese block?

For one 12" finished Fox and Geese block, with a quarter-inch seam: Background: 1 square 6⅞"; 2 squares 3⅞"; 4 squares 3½". Accent: 1 square 6⅞"; 2 squares 3⅞".

How many Fox and Geese blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Fox and Geese block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Fox and Geese quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app