Storm at Sea is known for looking curved while every seam is straight. Quiltler's version draws its diamonds entirely in half-square triangles on a six-by-six grid, small ones in the corners, stretched ones on the sides and a large one in the middle, so it can be rotary cut with no templates. The traditional block uses square-in-a-square and diamond units instead.
- 6 × 6 grid
- 6", 9" and 12" finished
- 3 fabrics
On this page
What the Storm at Sea block is made of
Every shape in a 12" block, by fabric, at its finished size.
| Fabric | Finished shapes |
|---|---|
| Sea | 20 half-square triangles (2") |
| Waves | 32 half-square triangles (2") |
| Foam | 20 half-square triangles (2") |
The pattern sews it from 36 half-square triangle units (H1, H2, H3).
It goes together in 6 rows of 6: 16 corner triangles, 16 side triangles and 4 center triangles.
Storm at Sea cutting chart
Cut sizes for one block at 6", 9" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.
6" finished block (1" grid, 6½" unfinished)
| Fabric | Cut | For |
|---|---|---|
| Sea | 2 squares 3¾" | H1: half-square triangles, eight at a time |
| Sea | 2 squares 1⅞" | H3: half-square triangles, two at a time |
| Waves | 4 squares 3¾" | H1, H2: half-square triangles, eight at a time |
| Foam | 2 squares 3¾" | H2: half-square triangles, eight at a time |
| Foam | 2 squares 1⅞" | H3: half-square triangles, two at a time |
9" finished block (1½" grid, 9½" unfinished)
| Fabric | Cut | For |
|---|---|---|
| Sea | 2 squares 4¾" | H1: half-square triangles, eight at a time |
| Sea | 2 squares 2⅜" | H3: half-square triangles, two at a time |
| Waves | 4 squares 4¾" | H1, H2: half-square triangles, eight at a time |
| Foam | 2 squares 4¾" | H2: half-square triangles, eight at a time |
| Foam | 2 squares 2⅜" | H3: half-square triangles, two at a time |
12" finished block (2" grid, 12½" unfinished)
| Fabric | Cut | For |
|---|---|---|
| Sea | 2 squares 5¾" | H1: half-square triangles, eight at a time |
| Sea | 2 squares 2⅞" | H3: half-square triangles, two at a time |
| Waves | 4 squares 5¾" | H1, H2: half-square triangles, eight at a time |
| Foam | 2 squares 5¾" | H2: half-square triangles, eight at a time |
| Foam | 2 squares 2⅞" | H3: half-square triangles, two at a time |
How to sew a 12" Storm at Sea block
Make the units
- Lay a Waves square on a Sea square, 5¾" square, right sides together. Draw both diagonals on the back of the lighter one.
- Sew a quarter inch either side of both lines.
- Cut the pair in half both ways, then along the drawn lines, and press open. Each pair makes eight units.
- Make 16 units from 2 pairs. Each should measure 2½" square with seam allowance.
- Lay a Waves square on a Foam square, 5¾" square, right sides together. Draw both diagonals on the back of the lighter one.
- Sew a quarter inch either side of both lines.
- Cut the pair in half both ways, then along the drawn lines, and press open. Each pair makes eight units.
- Make 16 units from 2 pairs. Each should measure 2½" square with seam allowance.
- Pair each Foam square with a Sea square, 2⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
- Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
- Make 4 units from 2 pairs. Each should measure 2½" square with seam allowance.
Sew the block
- The block takes 16 × H1, 16 × H2 and 4 × H3; make them first.
- Lay out the units in 6 rows of 6 as the drawing shows.
- Rows 1 and 5: sew corner triangle (H1), corner triangle (H1), side triangle (H2), side triangle (H2), corner triangle (H1) and corner triangle (H1) together, then press the seams to the right.
- Rows 2 and 6: sew corner triangle (H1), corner triangle (H1), side triangle (H2), side triangle (H2), corner triangle (H1) and corner triangle (H1) together, then press the seams to the left.
- Row 3: sew side triangle (H2), side triangle (H2), center triangle (H3), center triangle (H3), side triangle (H2) and side triangle (H2) together, then press the seams to the right.
- Row 4: sew side triangle (H2), side triangle (H2), center triangle (H3), center triangle (H3), side triangle (H2) and side triangle (H2) together, then press the seams to the left.
- Join the rows, nesting the seams where they meet, then press the seams open.
- The block should measure 12½" square including seam allowance. Check it against the drawing.
Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.
How many Storm at Sea blocks for a quilt?
With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:
| Quilt | Blocks across × down | Blocks | Finished top |
|---|---|---|---|
| Throw (60" × 72") | 5 × 6 | 30 | 60" × 72" |
| Queen (90" × 108") | 8 × 9 | 72 | 96" × 108" |
Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.
Design with this block
Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Storm at Sea. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.
The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library
Related blocks
Split Nine Patch
Cutting chart, sizes and sewing steps.
Double Pinwheel
Cutting chart, sizes and sewing steps.
Streak of Lightning
Cutting chart, sizes and sewing steps.
Zigzag
Cutting chart, sizes and sewing steps.
Every classic block in the studio is in the quilt block library.