Shaded Four Patch Quilt Block

A free cutting chart for 6", 9" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Shaded Four Patch is a four-patch with a dark square and a light square on one diagonal and two half-square triangles on the other, so the block shades from light in one corner to dark in the opposite one.

  • 2 × 2 grid
  • 6", 9" and 12" finished
  • 2 fabrics
The Shaded Four Patch block as the Quiltler studio draws it.

What the Shaded Four Patch block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Light1 square (6") and 2 half-square triangles (6")
Dark2 half-square triangles (6") and 1 square (6")

The pattern sews it from 2 half-square triangle units (H1).

Shaded Four Patch cutting chart

Cut sizes for one block at 6", 9" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (3" grid, 6½" unfinished)

FabricCutFor
Light1 square 3⅞"H1: half-square triangles, two at a time
Light1 square 3½"Finishes at 3" square
Dark1 square 3⅞"H1: half-square triangles, two at a time
Dark1 square 3½"Finishes at 3" square

9" finished block (4½" grid, 9½" unfinished)

FabricCutFor
Light1 square 5⅜"H1: half-square triangles, two at a time
Light1 square 5"Finishes at 4½" square
Dark1 square 5⅜"H1: half-square triangles, two at a time
Dark1 square 5"Finishes at 4½" square

12" finished block (6" grid, 12½" unfinished)

FabricCutFor
Light1 square 6⅞"H1: half-square triangles, two at a time
Light1 square 6½"Finishes at 6" square
Dark1 square 6⅞"H1: half-square triangles, two at a time
Dark1 square 6½"Finishes at 6" square

How to sew a 12" Shaded Four Patch block

Make the units

  1. Pair each Dark square with a Light square, 6⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 2 units from 1 pair. Each should measure 6½" square with seam allowance.

Sew the block

  1. The block takes 2 × H1; make them first.
  2. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Shaded Four Patch blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Shaded Four Patch. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Shaded Four Patch block FAQ

What do I cut for a 12" Shaded Four Patch block?

For one 12" finished Shaded Four Patch block, with a quarter-inch seam: Light: 1 square 6⅞"; 1 square 6½". Dark: 1 square 6⅞"; 1 square 6½".

How many Shaded Four Patch blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Shaded Four Patch block be?

It is drafted on a 2 × 2 grid, so it works at any size that grid divides evenly. 6", 9" and 12" give 3", 4½" and 6" squares of the grid.

Design a Shaded Four Patch quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app