Streak of Lightning Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

In Quiltler's Streak of Lightning, all sixteen half-square triangles on its four-by-four grid are turned the same way, dark half to the upper right, so the block is diagonal bands of light and dark. Turn every other block a quarter turn and the bands meet in zigzags.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Streak of Lightning block as the Quiltler studio draws it.

What the Streak of Lightning block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Light16 half-square triangles (3")
Dark16 half-square triangles (3")

The pattern sews it from 16 half-square triangle units (H1).

Streak of Lightning cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Light2 squares 4¾"H1: half-square triangles, eight at a time
Dark2 squares 4¾"H1: half-square triangles, eight at a time

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Light2 squares 5¾"H1: half-square triangles, eight at a time
Dark2 squares 5¾"H1: half-square triangles, eight at a time

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Light2 squares 7¾"H1: half-square triangles, eight at a time
Dark2 squares 7¾"H1: half-square triangles, eight at a time

How to sew a 12" Streak of Lightning block

Make the units

  1. Lay a Dark square on a Light square, 7¾" square, right sides together. Draw both diagonals on the back of the lighter one.
  2. Sew a quarter inch either side of both lines.
  3. Cut the pair in half both ways, then along the drawn lines, and press open. Each pair makes eight units.
  4. Make 16 units from 2 pairs. Each should measure 3½" square with seam allowance.

Sew the block

  1. The block takes 16 × H1; make them first.
  2. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Streak of Lightning blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Streak of Lightning. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Streak of Lightning block FAQ

What do I cut for a 12" Streak of Lightning block?

For one 12" finished Streak of Lightning block, with a quarter-inch seam: Light: 2 squares 7¾". Dark: 2 squares 7¾".

How many Streak of Lightning blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Streak of Lightning block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Streak of Lightning quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app