A worked answer

How Many Quilt Blocks for a King Quilt?

A king quilt (110 × 95 in) takes 63 twelve-inch blocks, 9 across and 7 down, plus a border — or 80 if you’d rather go a little over. Ten-inch blocks come closest without a border, at 110 by 90 inches.

A king quilt (110 × 95 in) takes 63 twelve-inch blocks, 9 across and 7 down, plus a border — or 80 if you’d rather go a little over. Ten-inch blocks come closest without a border, at 110 by 90 inches.

A quilt hanging past the mattress on the sides and the foot
Blocks fill the middle. A border makes up whatever the blocks leave.

Quiltler’s king quilt is 110 by 95 inches in the quilt sizes guide. The chart sets square blocks edge to edge, with no sashing and no border, and counts how many fit inside that size.

Blocks for a 110 × 95 inch king quilt

Finished blockAcross × downBlocksTop, no borderShort of 110 × 95Border to reach 110 × 95
6 in18 × 15270108 × 90 in2 in × 5 in1 in at the sides, 2 1/2 in top and bottom
8 in13 × 11143104 × 88 in6 in × 7 in3 in at the sides, 3 1/2 in top and bottom
9 in12 × 10120108 × 90 in2 in × 5 in1 in at the sides, 2 1/2 in top and bottom
10 in11 × 999110 × 90 in0 in × 5 innone at the sides, 2 1/2 in top and bottom
12 in9 × 763108 × 84 in2 in × 11 in1 in at the sides, 5 1/2 in top and bottom
14 in7 × 64298 × 84 in12 in × 11 in6 in at the sides, 5 1/2 in top and bottom
15 in7 × 642105 × 90 in5 in × 5 in2 1/2 in all round
16 in6 × 53096 × 80 in14 in × 15 in7 in at the sides, 7 1/2 in top and bottom

Finished sizes. Width first, then length. A border’s width here is finished; the border calculator gives the cut strips and yardage.

How the count works

This is the quilt size calculator’s “How many blocks fit” sum. Divide the width by the block and round down, then do the same for the length. Rounding down means the blocks never run past the size you asked for, so the top comes out the same size or a little smaller, and the gap is what a border is for. Each block is pieced 1/2 inch larger than it finishes (a 12 inch block measures 12 1/2 inches before it is sewn in), and the seams between blocks take that back.

To reach the exact size, add a border of half the shortfall on each side. For twelve-inch blocks on this quilt that is 1 inch at the sides, 5 1/2 inches top and bottom. If you would rather go over than under, round up instead: 10 across and 8 down is 80 blocks and 120 by 96 inches before any border.

Sashing changes the count. With 2 inch sashing between twelve-inch blocks, 8 across and 6 down fit: 48 blocks, finishing at 110 by 82 inches. The sashing calculator cuts the strips.

If your king is 120 × 120

Some patterns size a king at 120 × 120, the size of a typical King batting package. The same sum with twelve-inch blocks:

  • 10 across and 10 down: 100 blocks, 120 by 120 inches, with no border needed.

Quilt sizes vary with the bed, the mattress depth and how much drop you want, so there is no single king size. This page uses 110 by 95 from the quilt sizes guide; measure your bed, then use the form below with your own inches.

Work it out for your own size

The form is set to “How many blocks fit” for this quilt. Change the block, add sashing or a border, or type another size.

Watch it worked out

How big is a queen size quilt? · 23 seconds · on YouTube

Plan your quilt's size for a bed or a set of blocks: the step-by-step guide

The guides: plan your quilt’s size for a bed or a set of blocks, set the size of your quilt in the designer, split a quilt into equal blocks, and add borders. Two short tutorials show it on screen: Your first quilt and Borders and sashing.

Pick a block from the block patterns, then lay the quilt out in the king quilt designer.

More answers for a 110 × 95 king quilt

Same quilt: How much fabric · How much backing · How much binding · How much batting · How many fat quarters

Blocks for other sizes: Baby, 36 × 52 · Throw, 50 × 65 · Twin, 70 × 90 · Full, 85 × 90 · Queen, 90 × 95

Related calculators

FAQ

How many quilt blocks for a king quilt?

A king quilt (110 × 95 in) takes 63 twelve-inch blocks, 9 across and 7 down, plus a border — or 80 if you’d rather go a little over. Ten-inch blocks come closest without a border, at 110 by 90 inches.

What size blocks fit a king quilt best?

Ten-inch blocks come closest without a border, at 110 by 90 inches. Use the table for the other sizes, and the quilt size calculator for blocks that are not square or for sashing.

How do I make the blocks reach the exact size?

Add a border of half the shortfall on each side. With twelve-inch blocks that is 1 inch at the sides, 5 1/2 inches top and bottom.

How many 12 inch blocks for a 120 × 120 king quilt?

100 twelve-inch blocks, 10 across and 10 down, fill it exactly. Sizes vary by bed and drop; this page’s king is 110 by 95.

Design the quilt, then let the yardage follow

These calculators answer one question at a time. The studio counts every piece in a design, including binding, backing, and batting.

Design Online — Free Or get the companion app

Rated 4.4 stars on the App Store