Kansas Star Quilt Block

A free cutting chart for 6", 9" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Kansas Star is a three-by-three block: a half-square triangle in the center, an hourglass unit on each side for the points, and a half-square triangle in each corner with its star half to the outside.

  • 3 × 3 grid
  • 6", 9" and 12" finished
  • 2 fabrics
The Kansas Star block as the Quiltler studio draws it.

What the Kansas Star block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Background8 quarter-square triangles (4") and 5 half-square triangles (4")
Star5 half-square triangles (4") and 8 quarter-square triangles (4")

The pattern sews it from 5 half-square triangle units (H1) and 4 hourglass units (Q1).

Kansas Star cutting chart

Cut sizes for one block at 6", 9" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (2" grid, 6½" unfinished)

FabricCutFor
Background2 squares 3¼"Q1: hourglasses, two at a time
Background3 squares 2⅞"H1: half-square triangles, two at a time
Star2 squares 3¼"Q1: hourglasses, two at a time
Star3 squares 2⅞"H1: half-square triangles, two at a time

9" finished block (3" grid, 9½" unfinished)

FabricCutFor
Background2 squares 4¼"Q1: hourglasses, two at a time
Background3 squares 3⅞"H1: half-square triangles, two at a time
Star2 squares 4¼"Q1: hourglasses, two at a time
Star3 squares 3⅞"H1: half-square triangles, two at a time

12" finished block (4" grid, 12½" unfinished)

FabricCutFor
Background2 squares 5¼"Q1: hourglasses, two at a time
Background3 squares 4⅞"H1: half-square triangles, two at a time
Star2 squares 5¼"Q1: hourglasses, two at a time
Star3 squares 4⅞"H1: half-square triangles, two at a time

How to sew a 12" Kansas Star block

Make the units

  1. Pair each Star square with a Background square, 4⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 6 units from 3 pairs; you need 5, so 1 is spare. Each should measure 4½" square with seam allowance.
  4. Pair each Star square with a Background square, 5¼" square, right sides together. Draw a line corner to corner on the back of the lighter one, sew a quarter inch either side of it, cut on the line and press toward the darker fabric. Each pair makes two half-square triangles.
  5. Lay two half-square triangles right sides together, seams nested and each fabric facing the other. Draw a line corner to corner across the seam, sew a quarter inch either side of it, cut on the line and press. Every two half-square triangles make two hourglasses.
  6. Make 4 units from 2 pairs of squares. Each should measure 4½" square with seam allowance.

Sew the block

  1. The block takes 5 × H1 and 4 × Q1; make them first.
  2. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Kansas Star blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Kansas Star. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Kansas Star block FAQ

What do I cut for a 12" Kansas Star block?

For one 12" finished Kansas Star block, with a quarter-inch seam: Background: 2 squares 5¼"; 3 squares 4⅞". Star: 2 squares 5¼"; 3 squares 4⅞".

How many Kansas Star blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Kansas Star block be?

It is drafted on a 3 × 3 grid, so it works at any size that grid divides evenly. 6", 9" and 12" give 2", 3" and 4" squares of the grid.

Design a Kansas Star quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app