Pineapple Star Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Pineapple Star is a four-by-four star with no plain squares: a center of four half-square triangles whose star halves meet in a square set on point, a flying-geese unit on each side, and a half-square triangle in each corner with its star half to the outside.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Pineapple Star block as the Quiltler studio draws it.

What the Pineapple Star block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Background4 flying-geese triangles (6" × 3") and 8 half-square triangles (3")
Star16 half-square triangles (3")

The pattern sews it from 8 half-square triangle units (H1, H1), 4 flying-geese units (G1) and 1 pieced section (U1).

Pineapple Star cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Background1 square 4¼"G1: flying geese, four at a time with no waste
Background4 squares 2⅜"H1: half-square triangles, two at a time
Star4 squares 2⅜"H1: half-square triangles, two at a time
Star4 squares 2⅜"G1: flying geese, four at a time with no waste

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Background1 square 5¼"G1: flying geese, four at a time with no waste
Background4 squares 2⅞"H1: half-square triangles, two at a time
Star4 squares 2⅞"H1: half-square triangles, two at a time
Star4 squares 2⅞"G1: flying geese, four at a time with no waste

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Background1 square 7¼"G1: flying geese, four at a time with no waste
Background4 squares 3⅞"H1: half-square triangles, two at a time
Star4 squares 3⅞"H1: half-square triangles, two at a time
Star4 squares 3⅞"G1: flying geese, four at a time with no waste

How to sew a 12" Pineapple Star block

Make the units

  1. Pair each Star square with a Background square, 3⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 8 units from 4 pairs. Each should measure 3½" square with seam allowance.
  4. Lay two Star squares, 3⅞" square, on opposite corners of a Background square, 7¼" square, right sides together; they overlap in the middle. Draw a line corner to corner across both.
  5. Sew a quarter inch either side of the line, cut on the line and press the small triangles out.
  6. Lay one more Star square on the corner of each piece, draw a line corner to corner, sew either side of it, cut and press. Each set makes four geese.
  7. Make 1 set (4 geese). Each should measure 6½" × 3½" with seam allowance.

Sew unit U1

  1. Unit U1 takes 4 × H1; make them first.
  2. Sew each row of Unit U1 together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. Each unit U1 should measure 6½" square including seam allowance. Check it against the drawing.

Sew the block

  1. The block takes 4 × H1, 4 × G1 and 1 × unit U1; make them first.
  2. Lay the sections out as the drawing shows, 3 rows of 3. Sew the sections of each row together, pressing the seams in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Pineapple Star blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Pineapple Star. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Pineapple Star block FAQ

What do I cut for a 12" Pineapple Star block?

For one 12" finished Pineapple Star block, with a quarter-inch seam: Background: 1 square 7¼"; 4 squares 3⅞". Star: 4 squares 3⅞"; 4 squares 3⅞".

How many Pineapple Star blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Pineapple Star block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Pineapple Star quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app