Weathervane Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Weathervane is a star on a four-by-four grid: a four-patch of star and background squares in the center, a flying-geese unit on each side with a background goose between star-fabric corners, and a half-square triangle in each corner with its star half to the outside.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Weathervane block as the Quiltler studio draws it.

What the Weathervane block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Background4 flying-geese triangles (6" × 3"), 2 squares (3") and 4 half-square triangles (3")
Star12 half-square triangles (3") and 2 squares (3")

The pattern sews it from 4 half-square triangle units (H1), 4 flying-geese units (G1) and 1 four patch (U1).

Weathervane cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Background1 square 4¼"G1: flying geese, four at a time with no waste
Background2 squares 2⅜"H1: half-square triangles, two at a time
Background2 squares 2"Finishes at 1½" square
Star2 squares 2⅜"H1: half-square triangles, two at a time
Star4 squares 2⅜"G1: flying geese, four at a time with no waste
Star2 squares 2"Finishes at 1½" square

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Background1 square 5¼"G1: flying geese, four at a time with no waste
Background2 squares 2⅞"H1: half-square triangles, two at a time
Background2 squares 2½"Finishes at 2" square
Star2 squares 2⅞"H1: half-square triangles, two at a time
Star4 squares 2⅞"G1: flying geese, four at a time with no waste
Star2 squares 2½"Finishes at 2" square

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Background1 square 7¼"G1: flying geese, four at a time with no waste
Background2 squares 3⅞"H1: half-square triangles, two at a time
Background2 squares 3½"Finishes at 3" square
Star2 squares 3⅞"H1: half-square triangles, two at a time
Star4 squares 3⅞"G1: flying geese, four at a time with no waste
Star2 squares 3½"Finishes at 3" square

How to sew a 12" Weathervane block

Make the units

  1. Pair each Star square with a Background square, 3⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 4 units from 2 pairs. Each should measure 3½" square with seam allowance.
  4. Lay two Star squares, 3⅞" square, on opposite corners of a Background square, 7¼" square, right sides together; they overlap in the middle. Draw a line corner to corner across both.
  5. Sew a quarter inch either side of the line, cut on the line and press the small triangles out.
  6. Lay one more Star square on the corner of each piece, draw a line corner to corner, sew either side of it, cut and press. Each set makes four geese.
  7. Make 1 set (4 geese). Each should measure 6½" × 3½" with seam allowance.

Sew unit U1 (four patch)

  1. Sew each row of Unit U1 together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  2. Join the rows, matching the seams where they meet.
  3. Each unit U1 should measure 6½" square including seam allowance. Check it against the drawing.

Sew the block

  1. The block takes 4 × H1, 4 × G1 and 1 × unit U1; make them first.
  2. Lay the sections out as the drawing shows, 3 rows of 3. Sew the sections of each row together, pressing the seams in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Weathervane blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Weathervane. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Weathervane block FAQ

What do I cut for a 12" Weathervane block?

For one 12" finished Weathervane block, with a quarter-inch seam: Background: 1 square 7¼"; 2 squares 3⅞"; 2 squares 3½". Star: 2 squares 3⅞"; 4 squares 3⅞"; 2 squares 3½".

How many Weathervane blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Weathervane block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Weathervane quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app