Rising Star is a star within a star on an eight-by-eight grid. A small Sawtooth Star sits in the middle and becomes the center square of a large one, with four big flying-geese units around it and a plain background square in each corner.
- 8 × 8 grid
- 6", 8" and 12" finished
- 2 fabrics
On this page
What the Rising Star block is made of
Every shape in a 12" block, by fabric, at its finished size.
| Fabric | Finished shapes |
|---|---|
| Background | 4 flying-geese triangles (6" × 3"), 4 squares (3"), 4 flying-geese triangles (3" × 1½") and 4 squares (1½") |
| Star | 1 square (3"), 8 half-square triangles (3") and 8 half-square triangles (1½") |
The pattern sews it from 8 flying-geese units (G1, G2) and 1 pieced section (U1).
Rising Star cutting chart
Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.
6" finished block (¾" grid, 6½" unfinished)
| Fabric | Cut | For |
|---|---|---|
| Background | 1 square 4¼" | G1: flying geese, four at a time with no waste |
| Background | 1 square 2¾" | G2: flying geese, four at a time with no waste |
| Background | 4 squares 2" | Finishes at 1½" square |
| Background | 4 squares 1¼" | Finishes at ¾" square |
| Star | 4 squares 2⅜" | G1: flying geese, four at a time with no waste |
| Star | 1 square 2" | Finishes at 1½" square |
| Star | 4 squares 1⅝" | G2: flying geese, four at a time with no waste |
8" finished block (1" grid, 8½" unfinished)
| Fabric | Cut | For |
|---|---|---|
| Background | 1 square 5¼" | G1: flying geese, four at a time with no waste |
| Background | 1 square 3¼" | G2: flying geese, four at a time with no waste |
| Background | 4 squares 2½" | Finishes at 2" square |
| Background | 4 squares 1½" | Finishes at 1" square |
| Star | 4 squares 2⅞" | G1: flying geese, four at a time with no waste |
| Star | 1 square 2½" | Finishes at 2" square |
| Star | 4 squares 1⅞" | G2: flying geese, four at a time with no waste |
12" finished block (1½" grid, 12½" unfinished)
| Fabric | Cut | For |
|---|---|---|
| Background | 1 square 7¼" | G1: flying geese, four at a time with no waste |
| Background | 1 square 4¼" | G2: flying geese, four at a time with no waste |
| Background | 4 squares 3½" | Finishes at 3" square |
| Background | 4 squares 2" | Finishes at 1½" square |
| Star | 4 squares 3⅞" | G1: flying geese, four at a time with no waste |
| Star | 1 square 3½" | Finishes at 3" square |
| Star | 4 squares 2⅜" | G2: flying geese, four at a time with no waste |
How to sew a 12" Rising Star block
Make the units
- Lay two Star squares, 3⅞" square, on opposite corners of a Background square, 7¼" square, right sides together; they overlap in the middle. Draw a line corner to corner across both.
- Sew a quarter inch either side of the line, cut on the line and press the small triangles out.
- Lay one more Star square on the corner of each piece, draw a line corner to corner, sew either side of it, cut and press. Each set makes four geese.
- Make 1 set (4 geese). Each should measure 6½" × 3½" with seam allowance.
- Lay two Star squares, 2⅜" square, on opposite corners of a Background square, 4¼" square, right sides together; they overlap in the middle. Draw a line corner to corner across both.
- Sew a quarter inch either side of the line, cut on the line and press the small triangles out.
- Lay one more Star square on the corner of each piece, draw a line corner to corner, sew either side of it, cut and press. Each set makes four geese.
- Make 1 set (4 geese). Each should measure 3½" × 2" with seam allowance.
Sew unit U1
- Unit U1 takes 4 × G2; make them first.
- Sew each row of Unit U1 together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
- Join the rows, matching the seams where they meet.
- Each unit U1 should measure 6½" square including seam allowance. Check it against the drawing.
Sew the block
- The block takes 4 × G1 and 1 × unit U1; make them first.
- Lay the sections out as the drawing shows, 3 rows of 3. Sew the sections of each row together, pressing the seams in alternate directions row to row so they nest.
- Join the rows, matching the seams where they meet.
- The block should measure 12½" square including seam allowance. Check it against the drawing.
Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.
How many Rising Star blocks for a quilt?
With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:
| Quilt | Blocks across × down | Blocks | Finished top |
|---|---|---|---|
| Throw (60" × 72") | 5 × 6 | 30 | 60" × 72" |
| Queen (90" × 108") | 8 × 9 | 72 | 96" × 108" |
Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.
Design with this block
Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Rising Star. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.
The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library
Related blocks
Windmill Star
Cutting chart, sizes and sewing steps.
Sawtooth Star
Cutting chart, sizes and sewing steps.
Christmas Star
Cutting chart, sizes and sewing steps.
California Star
Cutting chart, sizes and sewing steps.
Every classic block in the studio is in the quilt block library.