A worked answer

How Big Is a Jelly Roll Race Quilt?

A jelly roll race quilt made from one 40-strip jelly roll comes out about 64 × 49 inches before you square it up: a generous throw. It is always 64 inches across, because five folds put 32 strips side by side and each strip finishes at 2 inches.

Charm squares, a jelly roll of strips, and a layer cake square
Precuts are sold as a pack: charms, jelly rolls, honey buns, layer cakes, fat eighths, and fat quarters.

Missouri Star's tutorial gives about 50 × 64 inches for the same roll. The difference is in the assumptions, so here they are. The jelly roll is the precut calculator's: 40 strips, each 2 1/2 × 42 inches. Each diagonal join uses about 2 1/2 inches of length (half the overlap square from each strip). Seams are 1/4 inch. Nothing is thrown away. That makes one strip 1582.5 inches long, nearly 44 yards, and 1582.5 ÷ 32 = 49.45, about 49 inches. If your roll's strips are closer to 44 inches, the top comes out about 52 inches long instead.

Jelly roll race quilt sizes

Jelly rollsStripsStrips across after 5 foldsTop before squaring up
1 roll, 2 1/2 × 42 in strips4032about 64 × 49 in
1 roll, 2 1/2 × 44 in strips4032about 64 × 52 in
2 rolls, 2 1/2 × 42 in strips8032about 64 × 99 in

Two rolls sewn into one strip and folded five times give a top about 64 × 99 inches: long enough for a twin, but narrower than the 70 inch twin in the sizes guide until borders go on the sides. A sixth fold would make it 128 inches across and half as long, which suits no bed. Folding only ever doubles, which is why a race quilt lands on 64 inches across whatever you start with.

How to sew a jelly roll race quilt

  1. Unroll the jelly roll and trim the selvage ends off the strips. Shuffle them if you want the prints mixed rather than in the roll's order.
  2. Join the strips end to end on the diagonal: lay one strip right side up, lay the next across its end right side down at a right angle, sew corner to corner across the overlap, trim to a 1/4 inch seam and press. Keep going until all 40 are one very long strip.
  3. Cut about 18 inches off the start of the long strip. This offsets the joins so they don't line up side by side when the strip is folded. Set the piece aside, or sew it on at the far end so no length is lost.
  4. Bring the two ends together, right sides facing, and sew down the long edge with a 1/4 inch seam until you reach the fold. Cut the fold open.
  5. You now have a strip two wide and half as long. Fold it in half again, sew the long edge, and cut the fold. Repeat until you have folded and sewn five times.
  6. Press the seams to one side, then square up the ends. The top is 32 strips, about 64 × 49 inches.

Borders to make it bigger

Borders are the easy way to grow a one-roll race top. Butted borders, sides first and then the top and bottom, cut from 42 inch fabric, worked by the border calculator for a 64 × 49 inch top:

Finished borderQuilt with borderCut stripsStripsFabric
2 inabout 68 × 53 in2 1/2 in61/2 yard
3 inabout 70 × 55 in3 1/2 in65/8 yard
4 inabout 72 × 57 in4 1/2 in63/4 yard
6 inabout 76 × 61 in6 1/2 in61 1/8 yards
8 inabout 80 × 65 in8 1/2 in71 3/4 yards

Measure your own top through the middle before cutting borders. A race top is long and stretchy along the strips, and it rarely comes out exactly the inches above.

How many jelly rolls for a twin, queen or king?

For a bed, keep the race's first step (every strip sewn into one long strip) but cut that strip into lengths as long as the quilt's center instead of folding it, and sew the lengths side by side. Each length finishes 2 inches wide. One roll gives about 1580 inches of strip once the joins are taken out (40 strips at 42 inches, less 2 1/2 inches for each join). Each length is cut an inch longer than the center, to square up.

A 90 × 95 inch queen with a 4 inch border has an 82 × 87 inch center: 41 lengths of 88 inches, which is 3608 inches of strip, or 3 rolls.

QuiltNo border4 in border8 in border
Twin
70 × 90 in
3
35 strips of 91 in
2
31 strips of 83 in
2
27 strips of 75 in
Full / double
85 × 90 in
3
43 strips of 91 in
3
39 strips of 83 in
2
35 strips of 75 in
Queen
90 × 95 in
3
45 strips of 96 in
3
41 strips of 88 in
2
37 strips of 80 in
King
110 × 95 in
4
55 strips of 96 in
3
51 strips of 88 in
3
47 strips of 80 in

Sizes are the quilt sizes guide's. Buying rolls from the same collection keeps the prints consistent across them.

Work it out for your own quilt

Precuts, borders and strips. The precut calculator counts how many pieces come out of a jelly roll, the border calculator works borders for any top, and the studio's Jelly Roll Strips start plans a strip-block quilt from the rolls you have and counts the strips used and left over. More in the jelly roll quilt planner.

Step-by-step in Quiltler

More quick answers

FAQ

How big is a jelly roll race quilt?

About 64 × 49 inches from one roll of 40 strips, 2 1/2 × 42 inches, before squaring up. Missouri Star quotes about 50 × 64. Strips closer to 44 inches long give about 64 × 52.

How many jelly rolls for a queen quilt?

3 rolls for a 90 × 95 inch queen with a 4 inch border, with the strips cut into 88 inch lengths rather than folded. With an 8 inch border, 2.

How many times do you fold a jelly roll race quilt?

Five times for a 40-strip roll. Each fold doubles the strips side by side: 2, 4, 8, 16 and then 32, which is 64 inches across.

How do I make a jelly roll race quilt bigger?

Add borders (6 inch borders make a one-roll top about 76 × 61), or use two rolls for a top about 64 × 99. For a queen or king, cut the long strip into lengths instead of folding.

Design the quilt, then let the yardage follow

These calculators answer one question at a time. The studio counts every piece in a design, including binding, backing, and batting.

Design Online — Free Or get the companion app

Rated 4.4 stars on the App Store