Pick the size from the wall. A common rule of thumb is about two-thirds the width of the furniture under the quilt; measure the space and mark it with painter's tape before you choose. Then check the hanging: a show, a gallery rod or a single nail each want something different on the back.
Common wall hanging sizes, and what each takes
| Size | 4 in sleeve: cut | Binding | Backing | Batting |
|---|---|---|---|---|
| 18 × 18 in | 9 × 17 in 1/4 yard | 2 strips 1/4 yard | 3/4 yard one width, no seam | 26 × 26 in Craft package (36 × 45) |
| 24 × 24 in | 9 × 23 in 1/4 yard | 3 strips 1/4 yard | 1 yard one width, no seam | 32 × 32 in Craft package (36 × 45) |
| 36 × 36 in | 9 × 35 in 1/4 yard | 4 strips 3/8 yard | 2 1/2 yards 2 widths seamed | 44 × 44 in Crib package (45 × 60) |
| 36 × 48 in | 9 × 35 in 1/4 yard | 5 strips 3/8 yard | 2 1/2 yards 2 widths seamed | 44 × 56 in Crib package (45 × 60) |
| 48 × 60 in | 9 × 47 in, from 2 strips 1/2 yard | 6 strips 1/2 yard | 3 1/8 yards 2 widths seamed | 56 × 68 in Twin package (72 × 90) |
Sleeves from the hanging sleeve calculator: twice the depth plus an inch of ease, an inch shorter than the quilt. Binding is 2 1/2 inch strips across 42 inch fabric. Backing and batting are the calculators' 4 inches past the top on every side, on 42 inch cotton.
The 36 inch square shows why the overhang matters on a small quilt. With 4 inches each side the back is 44 × 44, just wider than 42 inch fabric, so it takes 2 widths and 2 1/2 yards. Quilted at home with 2 inches each side, the back is 40 × 40 and one width does it: 1 1/8 yards.
The hanging sleeve
A sleeve is a tube sewn across the top of the back for a rod or a slat. Many quilt shows ask for a 4 inch sleeve, so read the entry rules first. Cut the strip 9 inches tall for a 4 inch sleeve: the extra inch is ease, so the rod does not pull the front of the quilt. Hem the short ends, fold it in half lengthwise, catch the raw edges in the binding seam at the top, and hand-sew the fold to the back. It is an inch shorter than the quilt so the rod's brackets have room at the ends.
A mini quilt under about 24 inches often hangs without a sleeve: two squares folded into triangles and sewn into the top corners with the binding make pockets for a thin dowel, or a single hanging tab does.
Work it out for your own wall quilt
Any size, any sleeve. The hanging sleeve calculator takes your quilt's width and the sleeve depth. The binding, backing and batting calculators take its width and height.
Set a wall hanging size in the studio
The Size list in the studio has Baby, Lap, Throw, Twin bed, Queen bed and King bed, and no wall hanging preset, so you type the size. Open the setup and press Blank quilt (or pick any start), then open Quilt settings at the top of the left panel. If you want a particular block, type Block width in the Across card and Block height in the Down card first. Then type Quilt width 36 and Quilt height 36: Columns and Rows follow, and Size reads Custom. Press the lock beside a number to hold it still while you change the others.
Step-by-step in Quiltler
- Your first quilt on the web · 3 min
- Your first quilt on iPhone · 2 min