Disappearing Nine Patch Quilt Block

A free cutting chart for 6", 9" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

A Disappearing Nine Patch starts as a nine patch. It is cut in half both ways through the center, three of the four quarters are turned, and the quarters are sewn back together. Only squares and rectangles are cut.

  • 6 × 6 grid
  • 6", 9" and 12" finished
  • 2 fabrics
The Disappearing Nine Patch block as the Quiltler studio draws it.

What the Disappearing Nine Patch block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Light8 rectangles (4" × 2")
Dark4 squares (4") and 4 squares (2")

Disappearing Nine Patch cutting chart

Cut sizes for one block at 6", 9" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1" grid, 6½" unfinished)

FabricCutFor
Light2 rectangles 3" × 2½"Finishes at 2½" × 2" in the block before it is cut
Light2 rectangles 2½" × 3"Finishes at 2" × 2½" in the block before it is cut
Dark1 square 3"Finishes at 2½" square in the block before it is cut
Dark4 squares 2½"Finishes at 2" square in the block before it is cut

9" finished block (1½" grid, 9½" unfinished)

FabricCutFor
Light2 rectangles 4" × 3½"Finishes at 3½" × 3" in the block before it is cut
Light2 rectangles 3½" × 4"Finishes at 3" × 3½" in the block before it is cut
Dark1 square 4"Finishes at 3½" square in the block before it is cut
Dark4 squares 3½"Finishes at 3" square in the block before it is cut

12" finished block (2" grid, 12½" unfinished)

FabricCutFor
Light2 rectangles 5" × 4½"Finishes at 4½" × 4" in the block before it is cut
Light2 rectangles 4½" × 5"Finishes at 4" × 4½" in the block before it is cut
Dark1 square 5"Finishes at 4½" square in the block before it is cut
Dark4 squares 4½"Finishes at 4" square in the block before it is cut

How to sew a 12" Disappearing Nine Patch block

Sew the block

  1. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  2. Join the rows, matching the seams where they meet.
  3. The nine patch should measure 13" square including seam allowance. Cut it in half through its center, side to side and top to bottom, into four 6½" squares.
  4. Leaving each quarter where it was, turn the top-right quarter a quarter turn clockwise, the bottom-right quarter a half turn and the bottom-left quarter a quarter turn anticlockwise. Sew the four back together in two rows, matching the seams where they meet in the middle.
  5. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Disappearing Nine Patch blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Start a throw-size Disappearing Nine Patch quilt in the studio and recolor it in your own fabrics. To add the block to any other quilt, open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Disappearing Nine Patch. Click the block, then click a space on the quilt.

Start a Disappearing Nine Patch quilt

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Disappearing Nine Patch block FAQ

What do I cut for a 12" Disappearing Nine Patch block?

For one 12" finished Disappearing Nine Patch block, with a quarter-inch seam: Light: 2 rectangles 5" × 4½"; 2 rectangles 4½" × 5". Dark: 1 square 5"; 4 squares 4½".

How many Disappearing Nine Patch blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Disappearing Nine Patch block be?

It is drafted on a 6 × 6 grid, so it works at any size that grid divides evenly. 6", 9" and 12" give 1", 1½" and 2" squares of the grid.

Design a Disappearing Nine Patch quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app