Steps to the Altar Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Steps to the Altar is a four-by-four block split on the diagonal into six dark squares and six light squares, with four half-square triangles along the diagonal between them, so the line between light and dark climbs in sawtooth steps.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Steps to the Altar block as the Quiltler studio draws it.

What the Steps to the Altar block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Light6 squares (3") and 4 half-square triangles (3")
Dark6 squares (3") and 4 half-square triangles (3")

The pattern sews it from 4 half-square triangle units (H1).

Steps to the Altar cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Light2 squares 2⅜"H1: half-square triangles, two at a time
Light6 squares 2"Finishes at 1½" square
Dark2 squares 2⅜"H1: half-square triangles, two at a time
Dark6 squares 2"Finishes at 1½" square

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Light2 squares 2⅞"H1: half-square triangles, two at a time
Light6 squares 2½"Finishes at 2" square
Dark2 squares 2⅞"H1: half-square triangles, two at a time
Dark6 squares 2½"Finishes at 2" square

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Light2 squares 3⅞"H1: half-square triangles, two at a time
Light6 squares 3½"Finishes at 3" square
Dark2 squares 3⅞"H1: half-square triangles, two at a time
Dark6 squares 3½"Finishes at 3" square

How to sew a 12" Steps to the Altar block

Make the units

  1. Pair each Dark square with a Light square, 3⅞" square, right sides together. Draw a line corner to corner on the back of the lighter one.
  2. Sew a quarter inch either side of the line, cut on the line and press open. Each pair makes two units.
  3. Make 4 units from 2 pairs. Each should measure 3½" square with seam allowance.

Sew the block

  1. The block takes 4 × H1; make them first.
  2. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Steps to the Altar blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Steps to the Altar. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Steps to the Altar block FAQ

What do I cut for a 12" Steps to the Altar block?

For one 12" finished Steps to the Altar block, with a quarter-inch seam: Light: 2 squares 3⅞"; 6 squares 3½". Dark: 2 squares 3⅞"; 6 squares 3½".

How many Steps to the Altar blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Steps to the Altar block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Steps to the Altar quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app