Washington Pavement Quilt Block

A free cutting chart for 7½", 10" and 12½" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Washington Pavement is a five-by-five grid of squares in three fabrics, set in diagonal bands that repeat one, two, three across the block, so the stones run corner to corner in stripes.

  • 5 × 5 grid
  • 7½", 10" and 12½" finished
  • 3 fabrics
The Washington Pavement block as the Quiltler studio draws it.

What the Washington Pavement block is made of

Every shape in a 12½" block, by fabric, at its finished size.

FabricFinished shapes
Stone 19 squares (2½")
Stone 28 squares (2½")
Stone 38 squares (2½")

Washington Pavement cutting chart

Cut sizes for one block at 7½", 10" and 12½" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

7½" finished block (1½" grid, 8" unfinished)

FabricCutFor
Stone 19 squares 2"Finishes at 1½" square
Stone 28 squares 2"Finishes at 1½" square
Stone 38 squares 2"Finishes at 1½" square

10" finished block (2" grid, 10½" unfinished)

FabricCutFor
Stone 19 squares 2½"Finishes at 2" square
Stone 28 squares 2½"Finishes at 2" square
Stone 38 squares 2½"Finishes at 2" square

12½" finished block (2½" grid, 13" unfinished)

FabricCutFor
Stone 19 squares 3"Finishes at 2½" square
Stone 28 squares 3"Finishes at 2½" square
Stone 38 squares 3"Finishes at 2½" square

How to sew a 12½" Washington Pavement block

Sew the block

  1. Sew each row of the block together left to right, as the drawing shows. Press the seam allowances in alternate directions row to row so they nest.
  2. Join the rows, matching the seams where they meet.
  3. The block should measure 13" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Washington Pavement blocks for a quilt?

With 12½" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63062½" × 75"
Queen (90" × 108")7 × 96387½" × 112½"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Washington Pavement. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Washington Pavement block FAQ

What do I cut for a 12½" Washington Pavement block?

For one 12½" finished Washington Pavement block, with a quarter-inch seam: Stone 1: 9 squares 3". Stone 2: 8 squares 3". Stone 3: 8 squares 3".

How many Washington Pavement blocks make a throw quilt?

At 12½" finished, 5 blocks across and 6 down, 30 in all, make a 62½" × 75" top with no sashing or border.

What sizes can a Washington Pavement block be?

It is drafted on a 5 × 5 grid, so it works at any size that grid divides evenly. 7½", 10" and 12½" give 1½", 2" and 2½" squares of the grid.

Design a Washington Pavement quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app