Bow Tie Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Bow Tie is a four-patch: two tie squares on one diagonal and two background squares on the other. Each background square has a small corner of tie fabric sewn on where the four squares meet, which pinches the middle into a knot.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Bow Tie block as the Quiltler studio draws it.

What the Bow Tie block is made of

Every shape in a 12" block, by fabric, at its finished size. Where a triangle sits on the corner of a square, the square is listed whole: it is cut whole and the corner sewn on top, stitch and flip.

FabricFinished shapes
Background2 squares (6")
Tie2 squares (6") and 2 half-square triangles (3")

The pattern sews it from 2 stitch-and-flip corner units (S1).

It goes together in 2 rows of 2: 2 tie squares and 2 knot units.

Bow Tie cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Background2 squares 3½"S1: stitch-and-flip corners
Tie2 squares 3½"Finishes at 3" square
Tie2 squares 2"S1: stitch-and-flip corners

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Background2 squares 4½"S1: stitch-and-flip corners
Tie2 squares 4½"Finishes at 4" square
Tie2 squares 2½"S1: stitch-and-flip corners

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Background2 squares 6½"S1: stitch-and-flip corners
Tie2 squares 6½"Finishes at 6" square
Tie2 squares 3½"S1: stitch-and-flip corners

How to sew a 12" Bow Tie block

Make the units

  1. Draw a line corner to corner on the back of each corner square: 1 × Tie 3½" square for each unit.
  2. Lay each square on its corner of a Background piece, 6½" square, right sides together as the drawing shows, and sew on the line.
  3. Trim a quarter inch outside the seam and press the corner out. Make 2 units.

Sew the block

  1. The block takes 2 × S1; make them first.
  2. Lay out the units and pieces in 2 rows of 2 as the drawing shows, each one turned the way it lies there.
  3. Row 1: sew tie square (Tie) and knot unit (S1) together, then press the seam toward the tie square.
  4. Row 2: sew knot unit (S1) and tie square (Tie) together, then press the seam toward the tie square.
  5. Join the rows, nesting the seams where they meet, then press the seam open.
  6. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Bow Tie blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Bow Tie. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Bow Tie block FAQ

What do I cut for a 12" Bow Tie block?

For one 12" finished Bow Tie block, with a quarter-inch seam: Background: 2 squares 6½". Tie: 2 squares 6½"; 2 squares 3½".

How many Bow Tie blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Bow Tie block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Bow Tie quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app