Rail Fence Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Rail Fence is four strips, or rails, of equal width sewn side by side into a square. Turn every other block a quarter turn and the rails step across the quilt in a zigzag.

  • 1 × 4 grid
  • 6", 8" and 12" finished
  • 4 fabrics
The Rail Fence block as the Quiltler studio draws it.

What the Rail Fence block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Rail 11 rectangle (12" × 3")
Rail 21 rectangle (12" × 3")
Rail 31 rectangle (12" × 3")
Rail 41 rectangle (12" × 3")

Rail Fence cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (6" × 1½" grid, 6½" unfinished)

FabricCutFor
Rail 11 rectangle 6½" × 2"Finishes at 6" × 1½"
Rail 21 rectangle 6½" × 2"Finishes at 6" × 1½"
Rail 31 rectangle 6½" × 2"Finishes at 6" × 1½"
Rail 41 rectangle 6½" × 2"Finishes at 6" × 1½"

8" finished block (8" × 2" grid, 8½" unfinished)

FabricCutFor
Rail 11 rectangle 8½" × 2½"Finishes at 8" × 2"
Rail 21 rectangle 8½" × 2½"Finishes at 8" × 2"
Rail 31 rectangle 8½" × 2½"Finishes at 8" × 2"
Rail 41 rectangle 8½" × 2½"Finishes at 8" × 2"

12" finished block (12" × 3" grid, 12½" unfinished)

FabricCutFor
Rail 11 rectangle 12½" × 3½"Finishes at 12" × 3"
Rail 21 rectangle 12½" × 3½"Finishes at 12" × 3"
Rail 31 rectangle 12½" × 3½"Finishes at 12" × 3"
Rail 41 rectangle 12½" × 3½"Finishes at 12" × 3"

How to sew a 12" Rail Fence block

Sew the block

  1. Lay the four rails side by side in order, Rail 1 to Rail 4.
  2. Sew them together along their long edges with a quarter-inch seam, and press the seams one way.
  3. The block should measure 12½" square including seam allowance.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Rail Fence blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Rail Fence. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Rail Fence block FAQ

What do I cut for a 12" Rail Fence block?

For one 12" finished Rail Fence block, with a quarter-inch seam: Rail 1: 1 rectangle 12½" × 3½". Rail 2: 1 rectangle 12½" × 3½". Rail 3: 1 rectangle 12½" × 3½". Rail 4: 1 rectangle 12½" × 3½".

How many Rail Fence blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Rail Fence block be?

It is drafted on a 1 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 6", 8" and 12" squares of the grid.

Design a Rail Fence quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app