Split Rail Quilt Block

A free cutting chart for 6", 9" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

Split Rail is three strips of equal width sewn side by side into a square: the two outer rails in one fabric and the center rail in another. Turn every other block a quarter turn and the rails weave across the quilt.

  • 1 × 3 grid
  • 6", 9" and 12" finished
  • 2 fabrics
The Split Rail block as the Quiltler studio draws it.

What the Split Rail block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Outer rails2 rectangles (12" × 4")
Center rail1 rectangle (12" × 4")

Split Rail cutting chart

Cut sizes for one block at 6", 9" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

6" finished block (6" × 2" grid, 6½" unfinished)

FabricCutFor
Outer rails2 rectangles 6½" × 2½"Finishes at 6" × 2"
Center rail1 rectangle 6½" × 2½"Finishes at 6" × 2"

9" finished block (9" × 3" grid, 9½" unfinished)

FabricCutFor
Outer rails2 rectangles 9½" × 3½"Finishes at 9" × 3"
Center rail1 rectangle 9½" × 3½"Finishes at 9" × 3"

12" finished block (12" × 4" grid, 12½" unfinished)

FabricCutFor
Outer rails2 rectangles 12½" × 4½"Finishes at 12" × 4"
Center rail1 rectangle 12½" × 4½"Finishes at 12" × 4"

How to sew a 12" Split Rail block

Sew the block

  1. Lay the three rails side by side, an outer rail on each side of the center rail.
  2. Sew them together along their long edges with a quarter-inch seam, and press both seams toward the center rail.
  3. The block should measure 12½" square including seam allowance.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Split Rail blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Split Rail. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Split Rail block FAQ

What do I cut for a 12" Split Rail block?

For one 12" finished Split Rail block, with a quarter-inch seam: Outer rails: 2 rectangles 12½" × 4½". Center rail: 1 rectangle 12½" × 4½".

How many Split Rail blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Split Rail block be?

It is drafted on a 1 × 3 grid, so it works at any size that grid divides evenly. 6", 9" and 12" give 6", 9" and 12" squares of the grid.

Design a Split Rail quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app