Sixteen Patch Quilt Block

A free cutting chart for 6", 8" and 12" blocks, the units it is made of, and how to sew it, worked out by the same code that writes Quiltler's printable patterns.

The Sixteen Patch is sixteen squares in four rows of four, light and dark alternating like a checkerboard. It is pieced from one strip set of four strips, light and dark alternating, cut into segments with every other one turned end for end.

  • 4 × 4 grid
  • 6", 8" and 12" finished
  • 2 fabrics
The Sixteen Patch block as the Quiltler studio draws it.

What the Sixteen Patch block is made of

Every shape in a 12" block, by fabric, at its finished size.

FabricFinished shapes
Light8 squares (3")
Dark8 squares (3")

The pattern sews it from 4 strip-set segments (strip set 1).

Sixteen Patch cutting chart

Cut sizes for one block at 6", 8" and 12" finished, with a ¼" seam allowance. These are the numbers a Quiltler pattern prints for the block: squares and rectangles are cut ½" larger than they finish, half-square triangles from squares ⅞" larger, and hourglasses and flying geese from squares 1¼" larger. Unit codes (H1, G1 and so on) match the sewing steps below.

WOF is the width of the fabric, 42" after the selvages are trimmed.

6" finished block (1½" grid, 6½" unfinished)

FabricCutFor
Light1 strip 2" × WOF (2 half length)Strip set 1
Dark1 strip 2" × WOF (2 half length)Strip set 1

8" finished block (2" grid, 8½" unfinished)

FabricCutFor
Light1 strip 2½" × WOF (2 half length)Strip set 1
Dark1 strip 2½" × WOF (2 half length)Strip set 1

12" finished block (3" grid, 12½" unfinished)

FabricCutFor
Light1 strip 3½" × WOF (2 half length)Strip set 1
Dark1 strip 3½" × WOF (2 half length)Strip set 1

How to sew a 12" Sixteen Patch block

Sew the strip sets

  1. Sew 4 strips together along their long edges in this order: Dark – Light – Dark – Light. Sew each seam in the opposite direction to the last so the set stays straight instead of bowing.
  2. Press every seam to one side, toward the darker fabric where you can.
  3. Make 1 half-length set from strips cut in half.
  4. Trim one end square, then crosscut 4 segments 3½" wide. Square the end again every few cuts.
  5. Use the segments for rows 1, 2, 3 and 4 of the block.
  6. Where a row reads the other way round, turn the segment end for end before sewing it in.

Sew the block

  1. The block takes 4 segments of strip set 1.
  2. Lay the segments out as the drawing shows, turning the segments in rows 2 and 4 end for end.
  3. Join the rows, matching the seams where they meet.
  4. The block should measure 12½" square including seam allowance. Check it against the drawing.

Check as you go: measure each unit before you sew it into a row. A unit that is a little small is easier to remake than a block that will not lie flat.

How many Sixteen Patch blocks for a quilt?

With 12" blocks set edge to edge, no sashing and no border, the nearest whole number of blocks to the studio's throw and queen sizes:

QuiltBlocks across × downBlocksFinished top
Throw (60" × 72")5 × 63060" × 72"
Queen (90" × 108")8 × 97296" × 108"

Sashing and borders change the count. The quilt size calculator works it out for any block size, and the quilt sizes guide lists bed sizes.

Design with this block

Open the designer, press Go to Blocks at the top of the right panel, pick Classics and search for Sixteen Patch. Click the block, then click a space on the quilt. It lands as ordinary pieces, so you can recolor any part of it.

Open the designer

The yardage and a printable pattern with this cutting chart come from the quilt you design. How to put a block on a quilt · Add a classic block to your library

Every classic block in the studio is in the quilt block library.

Calculators and guides for this block

Sixteen Patch block FAQ

What do I cut for a 12" Sixteen Patch block?

For one 12" finished Sixteen Patch block, with a quarter-inch seam: Light: 1 strip 3½" × WOF (2 half length). Dark: 1 strip 3½" × WOF (2 half length).

How many Sixteen Patch blocks make a throw quilt?

At 12" finished, 5 blocks across and 6 down, 30 in all, make a 60" × 72" top with no sashing or border.

What sizes can a Sixteen Patch block be?

It is drafted on a 4 × 4 grid, so it works at any size that grid divides evenly. 6", 8" and 12" give 1½", 2" and 3" squares of the grid.

Design a Sixteen Patch quilt

Lay the block out, try it in your own fabrics, and get the yardage and a printable pattern from the quilt you draw.

Design Online — Free Or get the companion app